Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 377.131 — Xerox Phaser 7800

Code: 377.131

Description: Duplex Wait Sensor On Jam. The Duplex Wait Sensor does not turn On within the specified time after the Exit 2 Drive Motor has started rotating in the Duplex intake direction.
Remedy: Check the following: • A paper transportation failure due to a foreign substance/burr on the paper path • Each Duplex Roll and Pinch Roll for contamination, wear, and revolution failure • Each Exit Roll and Pinch Roll for contamination, wear, and revolution failure • Each Duplex Roll Drive Gear for wear and damage • Each Exit Roll Drive Gear for wear and damage • The Exit 2 Gate for operation failure • Use of paper out of spec (refer to the Media and Tray Specifications). • The Duplex Wait Sensor for contamination, improper installation, and Actuator operation failure • The Duplex Wait Sensor for failure: dc330 Component Control [077-108] (PL 14.5) • The connection between the Duplex Wait Sensor P/J175 and the MD PWB P/J523 for open circuit, short circuit, and poor contact • The Duplex Motor for revolution failure: DC330 [077-073] (PL 14.5) • The Exit 2 Drive Motor for revolution failure: DC330 [077-062] (PL 17.4) • The Exit 2 Gate Solenoid for failure: DC330 [077-003] (PL 17.5) If no problems are found, replace the following parts in sequence: • MD PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie