Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 377.212 — Xerox Phaser 7800

Code: 377.212

Description: Tray Module Reset Fault. The Tray Module reset was detected.
Remedy: 1. Turn the power Off and On. 2. Check whether the voltage between the Tray Module PWB P/J541-12 (+) and the GND (- ) is +5VDC and whether the voltage between the Tray Module PWB P/J541-10 (+) and the GND (-) is +24VDC. 3. Turn the power Off and check the connection between the MD PWB P592 and the Tray Module PWB P/J541 for open circuit, short circuit, and poor contact. If no problems are found, replace the following parts in sequence: • Tray Module PWB • MD PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie