Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 377.602 — Xerox Phaser 7800

Code: 377.602

Description: Transparency Sensor Fault. An abnormal value was detected from the Transparency Sensor. (This is a hidden failure. Data is only recorded in history.)
Remedy: Check the following: • The Transparency Sensor and Reflective Prism for contamination and improper installation • Use of Transparency out of spec (refer to the Media and Tray Specifications). • The Transparency Sensor for failure: dc140 Analog Monitor [077-200] (PL 15.2) • The connection between the Transparency Sensor P/J161 and the MD PWB P/J523 for open circuit, short circuit, and poor contact • The connector ( P/J452) between the MD PWB and the MCU PWB for poor connection If no problems are found, replace the following parts in sequence: • MD PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie