Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 377.902 — Xerox Phaser 7800

Code: 377.902

Description: Exit Sensor 2 Static Jam. When the power was turned On, the M/C was stopped (Cycle Down/ Shut Down), or when the interlocks were closed (all interlocks including options), the Exit 2 Sensor detected paper.
Remedy: Check the following: • The Exit 2 Sensor for remaining paper, contamination, Actuator return failure, or improper installation • The Exit 2 Sensor for failure: dc330 Component Control [077-100] (PL 17.4) • The connection between the Exit 2 Sensor P/J164 and the MD PWB P/J522 for short circuit • The L/H High Cover Assembly for damage or mismatch If no problems are found, replace the following parts in sequence: • MD PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie