Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 389.615 — Xerox Phaser 7800

Code: 389.615

Description: RC Sample Block Fail-B-#4-Out. During the B (rough adjustment pattern) patch detection, the #4 (Black) patch at the MOB Sensor Out side did not satisfy the defined number of valid sample blocks. (This is a hidden failure. The Color Regi Spec cannot be guaranteed and Data is only recorded in history.)
Remedy: Check the density of K color. Is the density of K color normal? Y↓ N→Adjust to correct the density of K color. Check the connection between the MOB Sensor Out P/J151 and the MCU PWB P/J415 for connector disconnection, open circuit, short circuit, and poor contact. Is the connection normal? Y↓ N→Connect the MOB Sensor Out P/J151 to the MCU PWB P/J415 properly. Check the K Magnet Roll for contamination, scratches, and distortion. Is the Magnet Roll normal? Y↓ N→Replace the Developer (K) (PL 5.2 Item 6). Check the Transfer Belt for contamination, scratches, and distortion. Is the Transfer Belt normal? Y↓ N→Replace the IBT Assembly(PL 6.1) Check the K Imaging Unit for contamination, scratches, and distortion. Is the Imaging Unit normal? Y↓ N→Replace the Imaging Unit (K). Replace the MOB ADC Assembly. If the problem persists, replace the MCU PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie