Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 391.910 — Xerox Phaser 7800

Code: 391.910

Description: Waste Toner Bottle Not In Position. The Waste Toner Bottle is not in the proper position.
Remedy: Check that the Bottle Guide Assembly at the machine side and the Waste Toner Bottle does not have any deformation or foreign substances, and that they are installed properly. Is the Waste Toner Bottle installed properly? Y↓ N→Install the Waste Toner Bottle properly. If there is any deformation, replace the Waste Toner Bottle (PL 8.2) and Bottle Guide Assembly (PL 8.2 Item 1). Check the Waste Toner Bottle Position Sensor. Turn the power On and enter Service Diag mode (Entering Service Diagnostics). Enter dc330 Component Control [091-200]. Use a sheet of paper, etc. to block/clear the light path to the Waste Toner Bottle Position Sensor. Does the display change between High/Low? Y↓ N→Use Transmissive Sensor RAP to check the Waste Toner Bottle Position Sensor. Press the Stop button and turn the power Off. Replace the MCU PWB.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie