Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 391.927 — Xerox Phaser 7800

Code: 391.927

Description: Drum CRUM Y Not In Position. The Imaging Unit (Y) CRUM is not in the proper position (loose CRUM).
Remedy: 1. Remove and reinstall the Imaging Unit (Y). 2. Polish the connection terminals between the Imaging Unit (Y) CRUM PWB and the Imaging Unit CRUM Coupler Assembly (Y) CRUM with dry cloth. (When cleaning, do not use Imaging Unit cleaner, etc.) 3. Check the following: • The connection between the MD PWB P/J528 and the Imaging Unit CRUM Coupler Assembly (Y) P/J112 for open circuit, short circuit, and poor contact • The connection terminals between the Imaging Unit (Y) CRUM PWB and the Imaging Unit CRUM Coupler Assembly (Y) CRUM for damage and foreign substances • The Imaging Unit (Y) for improper installation If no problems are found, replace the following parts in sequence: • Imaging Unit (Y) • Imaging Unit CRUM Coupler Assembly (Y) (PL 8.1) • MD PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie