Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 392.659 — Xerox Phaser 7800

Code: 392.659

Description: ATC Amplitude Fault [C]. The difference between the maximum and minimum values in the ATC Sensor (C) measurement set is lower than the threshold value. (This is a hidden failure. Data is only recorded in history.)
Remedy: Check the following: • The connection between the ATC Sensor (C) and the ATC PWB P/J126 for open circuit, short circuit, and poor contact • The connection between the ATC PWB P/J633 and the MD PWB P/J528 for open circuit, short circuit, and poor contact • The Toner Dispense Motor (C) for revolution failure: dc330 Component Control [093-011] (PL 5.1) • The Drum Drive Motor (Y, M, C) for revolution failure: DC330 [091-027] (PL 3.3) • The Dev Drive Motor (Y, M, C) for revolution failure: DC330 [093-022] (PL 3.3) • The path from Toner Cartridge (C) to Developer (C) for toner blockage • The Developer (C) for internal toner blockage • The Toner Cartridge (C) for internal toner blockage If no problems are found, replace the following parts in sequence: • ATC Sensor (C) (PL 5.2 Item 4) • ATC PWB • MD PWB • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie