Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 392.676 — Xerox Phaser 7800

Code: 392.676

Description: ADC Mini Setup Fault [M]. The difference in densities among the ADC patches of M color is abnormal. (This is a hidden failure. (Data is only recorded in history.)
Remedy: Enter dc122 Fault History. Check whether ADC Sensor Fail or ATC Fail [M] has occurred. Has Fail 392.651 or 392.313 occurred? Y↓ N→Turn the power Off and check the following: • The Drum (M) for contamination • The 1st BTR (M) for contamination • The Transfer Belt for contamination • The connection and board springs between the HVPS (1st/2nd/DTC) and the 1st BTR (M) for open circuits, short circuits, and poor contacts • The connection and board springs between the HVPS (BCR) and the BCR (M) for open circuits, short circuits, and poor contacts • The connection and board springs between the HVPS (Dev) and the Magnet Roll (M) for open circuits, short circuits, and poor contacts If no problems are found, replace the following parts in sequence: • Imaging Unit (M) • HVPS (BCR) • HVPS (Dev) • HVPS (1st/2nd/DTC) • MCU PWB Go to the appropriate RAP.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie