Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 393.316 — Xerox Phaser 7800

Code: 393.316

Description: C Disp Motor Fault. Regardless of low usage of toner from C Toner Cartridge, it was detected to be empty.
Remedy: 1. Turn the power Off and On. 2. Replace the Toner Cartridge (C). If the problem persists, check the following: • The connectors of the MCU PWB P/J411 and the Toner CRUM Coupler (C) P/J122 for damage, foreign substances, bent connector pins, burns, and improper soldering on the PWB • The connection between the MCU PWB P/J411 and the Toner CRUM Coupler (C) P/J122 for open circuit, short circuit, and poor contact • The Toner Dispense Motor (C) (PL 5.1): dc330 Component Control [093-011] • The drive transmission path in the Dispense Assembly • The MCU PWB for failure.

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie