Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 393.925 — Xerox Phaser 7800

Code: 393.925

Description: Toner K CRUM Data Broken Fault. The system detected that the data written to the Toner CRUM (K) and the data read from the Toner CRUM (K) do not match.
Remedy: An Error Message appears on the UI - Reinsert an improperly seated consumable or replace any consumables with Error. Press Machine Status button and select Supplies tab for details. Remove and reinstall the Black Toner Cartridge and check for improper installation. The problem continues Y↓ N→End Check the NVM locations
740-053 Geographic Setting 3 = North America/Europe 12 = DMO 15 = Worldwide 740-055 Contract Type 2 = Sold 3 = Metered 31 = Neutral
The NVM values match the expected customer configuration. Y↓ N→Determine correct Contract Type from customer. Contact Technical Support Center or your NTS for the CRUM conversion procedure. 1. Polish the connection terminals between the Toner Cartridge (K) CRUM PWB and the Toner CRUM Coupler Assembly (K) CRUM with dry cloth. (When cleaning, do not use Drum cleaner, etc.) 2. Check the following: • The connection between the MCU PWB P/J411 and the Toner CRUM Coupler Assembly (K) P/J123 for open circuit, short circuit, and poor contact • The connection terminals between the Toner Cartridge (K) CRUM PWB and the Toner CRUM Coupler Assembly (K) CRUM for damage and foreign substances • The Toner Cartridge (K) for improper installation If no problems are found, replace the following parts in sequence: • Toner Cartridge (M) • Toner CRUM Coupler Assembly (M) (PL 5.1) • MCU PWB

← Xem tất cả mã lỗi Xerox Phaser 7800

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie