Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11,029.61 — Xerox Phaser 840

Code: 11,029.61

Display: 11,029.61 DMC_PROG_FAULT(29)
Description: Motion Segment Too Short. Software attempted to program a motion profile with a motion segment shorter than 750 microseconds. If this specifcation is violated the DMC interrupt service routine may not have time to reload the control store hardware event, when the system is busy.

← Xem tất cả mã lỗi Xerox Phaser 840

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie