Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 33,00X.4x — Xerox Phaser 8400

Code: 33,00X.4x

Description: Tray 1 Width Sensor Faults The Paper Width Sensor, located in the Tray 1/Front Door Assembly is reporting out of range values. The following troubleshooting procedure applies to these errors: 33,001.42 Tray 1 width value too low. 33,002.43 Tray 1 width value too high.
Causes: Tray 1/Front Door Assembly, PL 1.0 I/O Board (2/2) -
Remedy: • Check electrical connection to Tray 1 (P/J650). • Check for obstructions or damage to the Media Guides. • If the problem persists, follow the procedure below.
1 Check the Tray 1 Harness connection to the I/O Board (P/J610). Is the connection secure and the harness undamaged? Go to Step 2. Repair or replace the harness. 2 Test the Width Sensors. Run the Service Diagnostics Tray 1 Width Sensor test. Does the sensor operate correctly? Replace the I/O Board. Replace the Tray 1/ Front Door Assembly.

← Xem tất cả mã lỗi Xerox Phaser 8400

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie