Code: 5,0xx.4x
Description: Y-Axis Sub-System Faults The following troubleshooting procedure applies to these errors: 5,001.41 The Drum rotated once without a Drum Home Position Sensor activation. 5,002.42 The Y-Axis Encoder is faulty, or the Drum has stalled. 5,003.43 Problem in the Y-Axis sub-system. 5,004.44 Problem with the Y-Axis motion sub-system.
Causes: Y-Axis Belt, PL 2.0 Y--Axis Motor, PL 4.0 Electronics Module Power - Drum Assembly (Encoder) Right Side Harness / I/O Control -
Remedy: • Check for obstructions or debris. • If the problem persists, follow the procedure below.
1 Test the Y-Axis Encoder. Run the Service Diagnostics Y-Axis Encoder test from the Monitor menu. Did the test pass? Go to Step 2. Go to Step 3. 2 Check the Y-Axis Motor connection (P/ J18). Is the wiring faulty? Replace the wiring. Go to Step 4. 3 Check the Y-Axis Encoder wiring. Is the wiring faulty? Replace the wiring. Replace the Drum Assy. 4 Test the Y-Axis Drive. Run the Service Diagnostics Y-Axis Drive test. Did the test pass? Go to Step 5. Replace the Y-Axis Motor. 5 Test Y-Axis Belt tension. Run the Service Diagnostics Y-Axis Belt Tension test. Did the test pass? Go to Step 6. Replace the Y-Axis Belt. 6 Test the Y-Axis Motor. Run the Service Diagnostics Y-Axis Motor test. Did the test pass? Replace the Drum Assembly. Replace the Y-Axis Motor.
1 Test the Y-Axis Encoder. Run the Service Diagnostics Y-Axis Encoder test from the Monitor menu. Did the test pass? Go to Step 2. Go to Step 3. 2 Check the Y-Axis Motor connection (P/ J18). Is the wiring faulty? Replace the wiring. Go to Step 4. 3 Check the Y-Axis Encoder wiring. Is the wiring faulty? Replace the wiring. Replace the Drum Assy. 4 Test the Y-Axis Drive. Run the Service Diagnostics Y-Axis Drive test. Did the test pass? Go to Step 5. Replace the Y-Axis Motor. 5 Test Y-Axis Belt tension. Run the Service Diagnostics Y-Axis Belt Tension test. Did the test pass? Go to Step 6. Replace the Y-Axis Belt. 6 Test the Y-Axis Motor. Run the Service Diagnostics Y-Axis Motor test. Did the test pass? Replace the Drum Assembly. Replace the Y-Axis Motor.