Description: Y-Axis Motor media long during transfix. The media was longer than expected.
Causes:
Remedy: 1. Check for supported media. 2. Try heavier media. 3. Try loading only a few sheets. Some photo media may require running one sheet at a time. 4. Run the diagnostic Check Drum Y-Axis Encoder test. 5. Replace the Pick Assembly and Retard Roller. 6. Run the clean ink smears and check the Preheater exit flag for debris. 7. Remove the Preheater, and check the Preheater flag for ink or paper interference. 8. Replace the Preheaterif the error persists.