Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11,025.66 — Xerox Phaser 850

Code: 11,025.66

Display: 11,025.66 DMC_PROG_FAULT(25)
Description: Motion Segment Too Late. The DMC ASIC interrupt to program the event control hardware for the next segment in a motion control profile occurred too late. A motion profile consists of a list of absolute times and motor register values. After the hardware writes a DSP value, the software must program the event control store hardware for the next segment in the profile. This error occurs when any region, PostScript, Network or engine disables interrrupts for a long period of time, preventing the DMC interrupt service routine from running. This may be due to an unintentional coding error or because a task took a CPU exception which is processed with interrupts disabled, taking a long time to execute.

← Xem tất cả mã lỗi Xerox Phaser 850

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie