Description: Indication that the motor coil(s) is open or shorted, or the X-axis motor fuse has opened. Follow the procedure "Testing motor and solenoid resistances", on page 84 of this manual. Try diagnostics to verify X-axis movement. If there is not any movement, it is propable that the fuse is defective. The fuse is located in the power control board; the whole baord should be replaced. Some Phaser 840 printers in the serial number range of B9B1372 to B9B3218 may have a problem with the Power Controller Board that will result in a fault code 6,000.41