Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 9,0XX.4x — Xerox Phaser 8500

Code: 9,0XX.4x

Description: Ink Loader Faults An Ink Loader error has occurred. The following troubleshooting procedure applies to these errors: 9,000.44 The Ink Loader failed during operation. 9,005.49 The Cyan Ink Melt Heater is on, but no ink is detected. 9,006.41 The Magenta Ink Melt Heater is on, but no ink is detected. 9,007.42 The Yellow Ink Melt Heater is on, but no ink is detected. 9,008.43 The Black Ink Melt Heater is on, but no ink is detected. 9,015.41 Ink Loader Door opened to clear Cyan Ink Stick Jam. 9,016.41 Ink Loader Door opened to clear Magenta Ink Stick Jam. 9,017.41 Ink Loader Door opened to clear Yellow Ink Stick Jam. 9,018.41 Ink Loader Door opened to clear Black Ink Stick Jam. 9,025.41 Ink Loader Door opened twice to clear Cyan Ink Stick Jam. 9,026.41 Ink Loader Door opened twice to clear Magenta Ink Stick Jam. 9,027.41 Ink Loader Door opened twice to clear Yellow Ink Stick Jam. 9,028.41 Ink Loader Door opened twice to clear Black Ink Stick Jam. 9,035.41 Ink count flag stuck after melting 2.5 Cyan Ink Sticks. 9,036.41 Ink count flag stuck after melting 2.5 Magenta Ink Sticks. 9,037.41 Ink count flag stuck after melting 2.5 Yellow Ink Sticks. 9,038.41 Ink count flag stuck after melting 2.5 Black Ink Sticks.
Causes: Ink Loader Assy, PL 2.0 I/O Board (2/2) -
Remedy: • Check that the Ink Sticks are genuine Xerox. • Check for obstructions in the Ink Wells. • Check the Ink Loader data (P/J0150) and power (P/J5) connections. • Verify the Ink Sticks advance in the Ink Loader. • If the problem persists, follow the procedure below.
1 Check that the ink stick is able to advance in the ink loader chute. Check for broken or wrong type ink sticks. Are the Ink Sticks loading properly? Go to Step 2. Remove any blockage and/or replace the ink stick. Run clear ISC Fault test to clear the error. This must be performed following an ink loader replacement. 2 Test the appropriate Ink Melt Heater. Run the Service Diagnostics Ink Melt [1,2,3,4] test. • 1 = Yellow • 2 = Cyan • 3 = Magenta • 4 = Black Did the test pass? Replace the Printhead. Replace the Ink Loader.

← Xem tất cả mã lỗi Xerox Phaser 8500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie