Description: Tray 1 width sensor during warm-up. Tray 1 width sensor during operation. Tray 1 width sensor during Tray 1 pick
Causes:
Remedy: 1. Check the Tray 1 width guides for proper operation. Verify the guides are not moving during printing. 2. Check the Front Door is closed and the wiring is properly connected and seated. 3. Test the Tray 1 Width Sensor using Service Diagnostics. 4. Check the Tray 1 wiring to the I/O board. 5. Replace the I/O Board, then retest.