Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13,XXX.xx — Xerox Phaser 8510 MFP

Code: 13,XXX.xx

Description: Ink Loader Thermal Faults A thermal error has occurred. The following troubleshooting procedures apply to these errors: 13,328.43 The Cyan heater is too hot. 13,330.45 The Cyan heater took too long to reach the setpoint temperature. 13,387.48 The Cyan heater thermistor circuit is open. 13,389.41 The Cyan heater thermistor circuit is shorted. 13,391.43 The Cyan heater thermistor returned faulty reading. 13,392.44 The Magenta heater is too hot. 13,394.46 The Magenta heater took too long to reach the setpoint temperature. 13,451.49 The Magenta heater thermistor circuit is open. 13,453.42 The Magenta heater thermistor circuit is shorted. 13,455.44 The Magenta heater thermistor returned faulty reading. 13,456.45 The Yellow heater is too hot. 13,458.47 The Yellow heater took too long to reach setpoint temp. 13,515.41 The Yellow heater thermistor circuit is open. 13,517.43 The Yellow heater thermistor circuit is shorted. 13,519.45 The Yellow heater thermistor returned faulty reading. 13,456.45 The Black heater is too hot. 13,458.47 The Black heater took too long to reach setpoint temp. 13,515.41 The Black heater thermistor circuit is open. 13,517.43 The Black heater thermistor circuit is shorted. 13,519.45 The Black heater thermistor returned faulty reading.
Causes: Ink Loader, PL 2.0 Electronics Module - I/O Board, PL 5.0 I/O Board (2/2) - Electronics Module, PL 5.0 Electronics Module - Right Combined Cable, PL 5.0
Remedy: • Check that all system grounds are secured. • Check the ambient room temperature. • Check the fan operation and vents. • If the problem persists, follow the procedure below.
1 Verify that the ambient temperature of the room is within the system’s specifications. Is the room within operating parameters? Go to Step 2. Advise the customer of operational requirements. 2 Check ground integrity for the printer. Does the error persist? Go to Step 3. Complete. 3 Test the appropriate Ink Melt heater. Run the Service Diagnostics Ink Melt test. 1. Yellow 2. Cyan 3. Magenta 4. Black Does the Ink Melt Heater operate correctly? Replace the Electronics Module. Go to Step 4. 4 Check Ink Loader connections and wiring. Are the connections secure and the wiring undamaged? Replace the Ink Loader. Repair or replace the wiring. If the error persists, replace the I/O Board.

← Xem tất cả mã lỗi Xerox Phaser 8510 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie