Code: 6,0xx.4x
Description: X-Axis Fault An X-Axis drive error has occurred. The following troubleshooting procedure applies to this error: 6,000.41 X-Axis Motor current error.
Causes: X-Axis Motor, PL 4.0 Right Side Harness / I/O Control - Electronics Module, PL 5.0 Right Side Wire Routing (2/2) -
Remedy: • Check for Ink build-up or other obstructions around the Printhead. • Check the Printhead power (P/J4) connection and related wiring. • Verify the Printhead travels smoothly from left to right. • If the problem persists, follow the procedure below.
1 Check the X-Axis Motor wiring. Is the wiring faulty? Replace the wiring. Go to Step 2. 2 Test the X-Axis Motor. Run the Service Diagnostics X-Axis Motor test. Did the test pass? Replace the X-Axis Motor. Replace the Electronics Module.
1 Check the X-Axis Motor wiring. Is the wiring faulty? Replace the wiring. Go to Step 2. 2 Test the X-Axis Motor. Run the Service Diagnostics X-Axis Motor test. Did the test pass? Replace the X-Axis Motor. Replace the Electronics Module.