Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11,0XX.xx — Xerox Phaser 8550

Code: 11,0XX.xx

Description: Electronics Module Interface Faults A communications error has occurred. The following troubleshooting procedure applies to these errors: 11,001.47 The Upper 525-sheet feeder broken serial link detected. 11,002.48 The Lower 525-sheet feeder broken serial link detected. 11,003.49 Control Panel broken serial link detected 11,004.41 Control Panel or I/O Board broken serial link detected. 11,005.42 Power control broken serial link detected. 11,006.43 Printhead broken serial link detected. 11,007.44 PCI error detected. 11,008.45 The DMA hardware is not responding. 11,009.46 Communication timeout failure detected. 11,010.47 Hardware version mismatch. 11,011.48 Software version mismatch. 11,012.49 The power control PLD does not match the expected version. 11,013.41 I/O PLD version mismatch. 11,014.42 Control Panel version mismatch. 11,015.43 Printhead PLD version mismatch. 11,016.44 Lower 525-sheet feeder PLD version mismatch. 11,017.45 Upper 525-sheet feeder PLD version mismatch. 11,018.46 Titan version mismatch. 11,043.66 Control Panel waiting error
Causes: I/O Board, PL 2.0 Right Side Harness / I/O Control - Right Side Harness, PL 5.0 Right Side Harness / I/O Control - I/O Board Power Control Cable, PL 5.0 Right Side Harness / I/O Control - Left Side Harness, PL 5.0 Left Side Harness (1/2) - Electronics Module, PL 5.0 Electronics Module - Optional Feeder, PL 3.0 Left Side Harness (1/2) -
Remedy: • Check that all system grounds are secured. • Check or reseat all connections to the Electronics Module. • Check the condition of all harnesses. • If the problem persists, follow the procedure below.
1 Check ground integrity for the printer. Does the error persist? Go to Step 2. Complete. 2 Reseat all system interconnections and check that the cables are properly dressed. Does the error persist? Go to Step 3. Complete. 3 Reset NVRAM. Does the error persist? Locate the error code below. Complete. For errors 11, 001.47 and 11,017.45 Replace the Tray Lift Motor. Does the error persist? Replace the Electronics Module. Complete. For errors 11,002.48 and 11, 016.44 Check the Option Tray connection. Does the error persist? Replace the optional tray. Complete. For errors 11,003.49 and 11,0014.42 Replace the I/O BoardComplete. For errors 11,004.41 and 11,013.41 Replace the I/O Board. Does the error persist? Replace the Control Panel. Complete. For errors 11,006.43 and 11,015.43 Replace the Printhead. Complete. For error 11,009.46 Replace the I/O Board. Does the error persist? Replace the Electronics Module. Complete. For all other 11,000.4x errors: Replace the Electronics Module. Complete.

← Xem tất cả mã lỗi Xerox Phaser 8550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie