Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13,XXX.xx — Xerox Phaser 8550

Code: 13,XXX.xx

Description: Printhead Reservoir Thermal Faults A Printhead Reservoir thermal error has occurred. The following troubleshooting procedures apply to these errors: 13,264.42 The Printhead reservoir heater is too hot. 13,266.44 The Printhead reservoir heater took too long to reach setpoint temp. 13,323.47 The Printhead reservoir heater thermistor circuit is open. 13,325.49 The Printhead reservoir heater thermistor circuit is shorted. 13,327.42 The Printhead reservoir heater thermistor returned faulty reading.
Causes: Printhead, PL 2.0 Electronics Module -
Remedy: • Check that all system grounds are secured. • Check the ambient room temperature. • Check the fan operation and vents. • If the problem persists, follow the procedure below.
1 Verify that the ambient temperature of the room is within the system’s specifications. Is the room within operating parameters? Go to Step 2. Advise the customer of operational requirements. 2 Check ground integrity for the printer. Does the error persist? Go to Step 3. Complete. 3 Test the Printhead Reservoir temperature. Run the Service Diagnostics Reservoir Temperature test. Does the Printhead operate correctly? Go to Step 4. Replace the Printhead. 4 Check Printhead connections and wiring. Are the connections secure and the wiring undamaged? Replace the Printhead. Repair the wiring.

← Xem tất cả mã lỗi Xerox Phaser 8550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie