Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi D2X — Xerox Phaser 8550

Code: D2X

Description: The exit flag actuated unexpectedly exit.
Causes:
Remedy: 1. Check that the media is not too thick and is supported by the system. 2. Use a less glossy media. 3. If the Drum Maintenance Kit is near end of life, replace it. 4. Clean and inspect the exit rollers. 5. Check that the Exit Sensor Flag for proper installation or damage. Replace if necessary. 6. Test the Paper Path Drive using Service Diagnostics. 7. Replace the problem component.

← Xem tất cả mã lỗi Xerox Phaser 8550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie