Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi E2D, E2E, E2Q — Xerox Phaser 8550

Code: E2D, E2E, E2Q

Description: Tray 1 width sensor during warm-up. Tray 1 width sensor during operation. Tray 1 width sensor during Tray 1 pick
Causes:
Remedy: 1. Check the Tray 1 width guides for proper operation. Verify the guides are not moving during printing. 2. Check the Front Door is closed and the wiring is properly connected and seated. 3. Test the Tray 1 Width Sensor using Service Diagnostics. 4. Check the Tray 1 wiring to the I/O board. 5. Replace the I/O Board, then retest.

← Xem tất cả mã lỗi Xerox Phaser 8550

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie