Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11,100.60 — Xerox Phaser 8560

Code: 11,100.60

Description: Electronics Module Temperature Fault The root problem for this error is temperature sensitivity with the power supply’s opto-isolator chips. The following troubleshooting procedure applies to this error: 11,100.60 The system reports an overheat condition.
Causes: Electronics Module, PL 5.0 Electronics Module Power - Electronics Module Fan, PL 4.0 Left Side Harness (2/2) -
Remedy: • Check the ambient room temperature. • Check for obstructions in the Air Vents. If obstructions are cleared, allow time for the system to cool. • If the problem persists, follow the procedure below.
1 Check that the air ducts are free of obstructions and the fans are operating correctly. Are the fans operating correctly? Replace the Electronics Module. Replace the defective fan.

← Xem tất cả mã lỗi Xerox Phaser 8560

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie