Code: 13,000.48
Description: Printhead Thermal Fault A thermal error is detected in the Printhead. The following troubleshooting procedure applies to this error: 13,000.48 A thermal fault was detected in the Printhead.
Causes: Printhead, PL 2.0 Electronics Module - NVRAM, PL 5.0
Remedy: • Check that all system grounds are secured. • Check the ambient room temperature. • Check the fan operation and vents. • If the problem persists, follow the procedure below.
1 Check ground integrity for the printer. Does the error persist? Go to Step 2. Complete. 2 Reset NVRAM. Does the error persist? Replace the NVRAM device. Complete. 3 Reseat all system connections to the Printhead and check that the harnesses are properly dressed. Does the error persist? Replace the Printhead. Complete.
1 Check ground integrity for the printer. Does the error persist? Go to Step 2. Complete. 2 Reset NVRAM. Does the error persist? Replace the NVRAM device. Complete. 3 Reseat all system connections to the Printhead and check that the harnesses are properly dressed. Does the error persist? Replace the Printhead. Complete.