Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 34,00X.4x — Xerox Phaser 8560

Code: 34,00X.4x

Description: Printhead NVRAM Faults The Printhead is unable to access system NVRAM. The following troubleshooting procedure applies to these errors: 34,001.43 An error occurred while attempting read/write access to the Printhead calibration partition in NVRAM. The Printhead cable may be unplugged. 34,002.44 An error occurred while attempting read/write access to the Printhead ink data partition in NVRAM. 34,003.45 An error occurred while attempting read/write access to the Printhead data partition in NVRAM. 34,004.46 An error occurred while accessing the Printhead NVRAM hardware for purposes of initialization. The Printhead cable may be unplugged.
Causes: Printhead, PL 2.0 Electronics Module - Printhead Interface Cable, PL 5.0 Electronics Module -
Remedy: • Check data connection to the Printhead. • Check for obstructions or damage to the Media Guides. • If the problem persists, follow the procedure below.
1 Check the Printhead data cable connections (P/J3 and P/J180). Are the connections secure and the cable undamaged? Go to Step 2. Repair or replace the cable. 2 Replace the Printhead. Does the error persist? Replace the Electronics Module. Complete.

← Xem tất cả mã lỗi Xerox Phaser 8560

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie