Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 37,026.44 — Xerox Phaser 8560

Code: 37,026.44

Description: PEST Purge Pump Fault An error has occurred related to the Purge Pump. The following troubleshooting procedure applies to this error: 37,026.44 The Purge Pump purge valve is drawing less power than expected.
Causes: Purge Pump, PL 2.0 Left Side Harness (2/2) - Electronics Module, PL 4.0 Left Side Harness (2/2) -
Remedy: • Check the Purge Pump for damage or obstructions. • If the problem persists, follow the procedure below.
1 Test the Purge Pump. Run the Service Diagnostics Purge Vent Solenoid test. Does the pump operate correctly? Go to Step 2. Replace the Purge Pump. 2 Check the pump connection to the Left Side Harness. Is the connection secure and the harness undamaged? Replace the Purge Pump. Repair of replace the Left Side Harness.

← Xem tất cả mã lỗi Xerox Phaser 8560

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie