Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6,0xx.6x — Xerox Phaser 8560

Code: 6,0xx.6x

Description: X-Axis Program Faults A software error has occurred. The following troubleshooting procedure applies to these errors: 6,001.64 The X-Axis task received an unexpected message. 6,002.65 Attempt to home X-Axis drive from wrong state. 6,008.62 Attempt to use X-Axis drive without initialization. 6,011.65 Attempt to service X-Axis drive in wrong state. 6,013.67 Unknown X-Axis program fault. 6,017.62 Attempt to drive X-Axis using wrong server. 6,018.63 Attempt to move with the X-Axis not initialized. 6,019.64 Attempt to move with the X-Axis not at home position. 6,023.68 Could not allocate memory for X-Axis parameters. 6,025.66 Attempt to home the X-Axis drive without initialization. 6,032.68 Unrecognized X-Axis motion. 6,033.60 Could not allocate memory for X-Axis move parameters.
Causes: NVRAM, PL 5.0
Remedy: • Reset NVRAM and retest. • If the problem persists, follow the procedure below.
1 Reseat all Electronics Module connections. Does the problem persist? Go to Step 2. Complete. 2 Check ground integrity. Are the system grounds connected? Reset NVRAM. If the error persists, replace the NVRAM device. Reconnect the system grounds.

← Xem tất cả mã lỗi Xerox Phaser 8560

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie