Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 7,007.49 — Xerox Phaser 8560

Code: 7,007.49

Description: Process Drive Fault A Process Drive or Printhead error has occurred. The following troubleshooting procedures applies to this error: 7,007.49 The Process Drive stalled while tilting the Printhead.
Causes: Process Drive, PL 4.0 Right Side Harness / I/O Control -
Remedy: • Check that the Process Drive gear train is properly homed. • Check for obstructions or ink spills around the Printhead. • Verify the Printhead travels smoothly from left to right. • Check the Printhead Restraint Arms. • If the problem persists, follow the procedure below.
1 Check that the Process Drive is properly aligned (ADJ 4.7.1). Is the Process Drive misaligned? Perform ADJ 4.7.1. Go to Step 2. 2 Remove the Printhead and inspect the Head Tilt Gear, Spring, and Process Drive gears for ink spills. Clean if necessary. Does the error persist? Go to Step 3. Complete. 3 Realign the Process Drive (ADJ 4.7.1). Does the error persist? Replace the Process Drive. Complete.

← Xem tất cả mã lỗi Xerox Phaser 8560

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie