Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11,300.6x — Xerox Phaser 8560 MFP

Code: 11,300.6x

Description: EMC Motor Control Faults A software error has occurred. The following troubleshooting procedure applies to these errors: 11,300.6x Motor told to move too late.
Causes: Electronics Module, PL 5.0 Electronics Module Power -
Remedy: • Reset NVRAM and retest. • If the problem persists, follow the procedure below.
1 Reseat all Electronics Module connections. Does the problem persist? Go to Step 2. Complete. 2 Check ground integrity. Are the system grounds connected? Replace the Electronics Module. Reconnect the system grounds.

← Xem tất cả mã lỗi Xerox Phaser 8560 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie