Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13,000.48 — Xerox Phaser 8560 MFP

Code: 13,000.48

Description: Printhead Thermal Fault A thermal error is detected in the Printhead. The following troubleshooting procedure applies to this error: 13,000.48 A thermal fault was detected in the Printhead.
Causes: Printhead, PL 2.0 Electronics Module - NVRAM, PL 5.0
Remedy: • Check that all system grounds are secured. • Check the ambient room temperature. • Check the fan operation and vents. • If the problem persists, follow the procedure below.
1 Check ground integrity for the printer. Does the error persist? Go to Step 2. Complete. 2 Reset NVRAM. Does the error persist? Replace the NVRAM device. Complete. 3 Reseat all system connections to the Printhead and check that the harnesses are properly dressed. Does the error persist? Replace the Printhead. Complete.

← Xem tất cả mã lỗi Xerox Phaser 8560 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie