Description: D3C D3M D3N D3P D3Q D3R D3T Exit flag time-out during mechanical recovery. Exit flag timed out following Tray 2 Pick. Exit flag timed out following Tray 3 Pick. Exit flag timed out following Tray 4 Pick. Exit flag timed out following Tray 1 Pick. Exit flag timed out during duplexing. Exit flag time-out during transfix.
Causes:
Remedy: 1. Check that the media is not too thick and is supported by the system. 2. Check that the exit path is free of obstructions. 3. If the Drum Maintenance Kit is near end of life, replace it. 4. Clean and inspect the Stripper Blade. 5. Clean and inspect the exit rollers. Check that the rollers rotate freely. 6. Check the Exit Sensor Flag for proper installation or damage. Replace if necessary. 7. Test the Paper Path Drive using Service Diagnostics. 8. Replace the problem component.