Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11,033.65 — Xerox Phaser 860

Code: 11,033.65

Display: 11,033.65 DMC_PROG_FAULT(33)
Description: Motion Control Event Missed. A missed control store event was detected. A health check routine is called every 400 milliseconds, the A/D update period, and checks that all the currently pending hardware motion profile events are for some time in the future. If one is pending for a time in the past, then it generates this error. A missed DMC interrupt due to interrupts disabled too long, by any region, is a probable cause.

← Xem tất cả mã lỗi Xerox Phaser 860

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie