Code: 31,001.40
Description: Mechanical Initialization Jam A software error has occurred. The following troubleshooting procedure applies to this error: 31,001.40 Mechanical initialization jam fault.
Causes: Media Drive Assy, PL 4.0 Left Side Harness (2/2) -
Remedy: • Check routing of tray sensor harnesses. • Check that the Take Away Rollers are free of obstructions. • If the problem persists, follow the procedure below.
1 Check the Take Away Rollers. Do the rollers show signs of excessive wear or damage? Replace the affected roller. Go to Step 2. 2 Test the Media Drive. Run the Service Diagnostics Paper Path Drive test. Does the Media Drive operate correctly? Go to Step 4. Go to Step 3. 3 DId the Media Drive run extremely fast? Replace the Media Drive Assembly. Go to Step 4. 4 Check the rollers. Remove the Media Drive Assembly and check each roller for binding or drag. Do the rollers rotate correctly? Replace the Media Drive Assembly. Repair or replace rollers.
1 Check the Take Away Rollers. Do the rollers show signs of excessive wear or damage? Replace the affected roller. Go to Step 2. 2 Test the Media Drive. Run the Service Diagnostics Paper Path Drive test. Does the Media Drive operate correctly? Go to Step 4. Go to Step 3. 3 DId the Media Drive run extremely fast? Replace the Media Drive Assembly. Go to Step 4. 4 Check the rollers. Remove the Media Drive Assembly and check each roller for binding or drag. Do the rollers rotate correctly? Replace the Media Drive Assembly. Repair or replace rollers.