Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 37,0XX.4x — Xerox Phaser 8860

Code: 37,0XX.4x

Description: PEST Clutch/Solenoid Faults An heating error has occurred. The following troubleshooting procedure applies to these errors: 37,017.44 The Head Maintenance Clutch is drawing less power than expected. 37,018.45 The Deskew Clutch is drawing less power than expected. 37,019.46 The Pick Clutch is drawing less power than expected. 37,020.48 The Tray 1 Pick Solenoid is drawing less power than expected. 37,021.42 The Strip Solenoid is drawing less power than expected. 37,022.4x The Preheater Lift Solenoid is drawing less power than expected. 37,023.4x The Head Tilt Solenoid is drawing less power than expected.
Causes: Head Maintenance Clutch, PL 4.0 I/O Board (2/2) - Deskew Clutch, PL 4.0 Left Side Harness (1/2) - Pick Clutch, PL 4.0 Left Side Harness (1/2) - Tray 1 Pick Solenoid, PL 4.0 Left Side Harness (1/2) - Strip Solenoid, PL 3.0 I/O Board (1/2) - Preheater Lift Solenoid, PL 4.0 Left Side Harness (2/2) - Head Tilt Solenoid, PL 4.0 Left Side Harness (2/2) -
Remedy: • Check the indicated component for damage, wear, or obstructions. • If the problem persists, follow the procedure below.
1 Test the component indicated by the error. Run the Service Diagnostics test for the affected component. Does the component operate correctly? Go to Step 2. Replace the affected component. 2 Check wiring to the affected component. Is the wiring damaged? Repair or replace the harness. Replace the affected component.

← Xem tất cả mã lỗi Xerox Phaser 8860

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie