Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 2,00X.xx — Xerox Phaser 8860 MFP

Code: 2,00X.xx

Description: I/O Board Errors The following troubleshooting procedure applies to these errors: 2,001.47 The Print Engine does not detect the I/O Board
Causes: I/O Board, PL 5.0 Right Side Harness / I/O Control - Right Side Harness, PL 5.0 Right Side Wire Routing (1/2) - I/O Board Power Control Cable, PL 5.0 Right Side Wire Routing (1/2) -
Remedy: • Check the I/O Board for obvious signs of damage. • Check that all connections to the board are secure by reseating each connection. • If the problem persists, follow the procedure below.
1 Check the I/O Board for damage. Are the connectors damaged? Repair the damaged connections. Go to Step 2. 2 Reseat all I/O Board connections. Does the problem persist? Go to Step 3. Complete. 3 Check I/O Power Control Cable continuity between P/J840 on the I/O Board and P/ J10 on the Electronics Module. Is the wiring defective? Replace the cable. If the error persists, replace the I/O Board. Replace the I/O Board

← Xem tất cả mã lỗi Xerox Phaser 8860 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie