Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 31,001.40 — Xerox Phaser 8860 MFP

Code: 31,001.40

Description: Mechanical Initialization Jam A software error has occurred. The following troubleshooting procedure applies to this error: 31,001.40 Mechanical initialization jam fault.
Causes: Media Drive Assy, PL 4.0 Left Side Harness (2/2) -
Remedy: • Check routing of tray sensor harnesses. • Check that the Take Away Rollers are free of obstructions. • If the problem persists, follow the procedure below.
1 Check the Take Away Rollers. Do the rollers show signs of excessive wear or damage? Replace the affected roller. Go to Step 2. 2 Test the Media Drive. Run the Service Diagnostics Paper Path Drive test. Does the Media Drive operate correctly? Go to Step 4. Go to Step 3. 3 DId the Media Drive run extremely fast? Replace the Media Drive Assembly. Go to Step 4. 4 Check the rollers. Remove the Media Drive Assembly and check each roller for binding or drag. Do the rollers rotate correctly? Replace the Media Drive Assembly. Repair or replace rollers.

← Xem tất cả mã lỗi Xerox Phaser 8860 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie