Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 6,0xx.4x — Xerox Phaser 8860 MFP

Code: 6,0xx.4x

Description: X-Axis Fault An X-Axis drive error has occurred. The following troubleshooting procedure applies to this error: 6,000.41 X-Axis Motor current error.
Causes: X-Axis Motor, PL 4.0 Right Side Harness / I/O Control - Electronics Module, PL 5.0 Right Side Wire Routing (2/2) -
Remedy: • Check for Ink build-up or other obstructions around the Printhead. • Check the Printhead power (P/J4) connection and related wiring. • Verify the Printhead travels smoothly from left to right. • If the problem persists, follow the procedure below.
1 Check the X-Axis Motor wiring. Is the wiring faulty? Replace the wiring. Go to Step 2. 2 Test the X-Axis Motor. Run the Service Diagnostics X-Axis Motor test. Did the test pass? Replace the X-Axis Motor. Replace the Electronics Module.

← Xem tất cả mã lỗi Xerox Phaser 8860 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie