Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 7,006.4x — Xerox Phaser 8860 MFP

Code: 7,006.4x

Description: Head Tilt Solenoid Fault A Printhead tilt error has occurred. The following troubleshooting procedure applies to this error: 7,006.xx The Head Tilt Solenoid is not activating the Head Tilt Cam, or the Printhead is not tilting properly.
Causes: Head Tilt Gear, PL 4.0 Head Tilt Solenoid, PL 4.0 Left Side Harness (2/2) - Process Drive, PL 4.0 Right Side Harness / I/O Control -
Remedy: • Check for obstructions or ink spills around the Printhead. • Verify the Printhead travels smoothly from left to right. • Check the Printhead Restraint Arms. • If the problem persists, follow the procedure below.
1 Check that the Process Drive is properly aligned (ADJ 4.7.1). Is the Process Drive misaligned? Perform ADJ 4.7.1. Go to Step 2. 2 Reboot the system. Is the tilt-head activating the Head Tilt Gear. Go to Step 4. Go to Step 3. 3 Check for Ink spills on or near the Head Tilt Gear. Remove ink spills or reinstall the head-tilt and start over with Step 1. Go to Step 4. 4 Review instructions for 7,008.xx and 7,010.xx fault codes. Follow recommended actions for error codes and reboot the printer.

← Xem tất cả mã lỗi Xerox Phaser 8860 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie