Description: A2J Deskew flag sensor event during head purge. A2K Deskew sensor in an unexpected state during a Transfix Roller oiling. A2M A2N A2P A2S A2Q The deskew flag tripped unexpectedly while picking paper from Tray 2. The deskew flag tripped unexpectedly while picking paper from Tray 3. The deskew flag tripped unexpectedly while picking paper from Tray 4. Deskew sensor in unexpected state during media stage for transfix. The deskew flag tripped unexpectedly while the printer was picking paper from Tray 1.
Causes:
Remedy: 1. Try using different, supported media 2. Ensure the paper guides are snug against the media in the tray 3. Push up on Tray {2 - 4} Nudger Roller until it is captured by actuator arm. 4. Run the following diagnostic tests, Deskew Flag, Tray {2-4} Pick Clutch and the Tray {2-4} Solenoid. 5. Check system grounding. 6. Verify all doors and covers are fully closed and not moving during printing. 7. Replace the Tray {2 - 4} Pick Clutch. 8. Replace the Retard Roller. 9. Replace the Preheater.