Code: P4A ... P4X
Description: P4A P4B P4C P4D PFE P4F P4G P4H P4J P4K P4L P4S P4T P4V P4W P4X Process Drive stalled on power-up following an abnormal shutdown. Process Drive stalled on power-up following a normal shutdown. Process Drive stalled during mechanical recovery Process Drive stalled during warm-up. Process Drive stalled during ready state. Process Drive stalled during a fault state. Process Drive stalled during an auto drum maintenance cycle. Process Drive stalled during printhead maintenance. Process Drive stalled during printhead purge. Process Drive stalled during an oil Transfix Roller cycle. Process Drive stalled during standby mode. Process Drive stalled during staging for transfix. Process Drive stalled during transfixing. Process Drive stalled during a print drum maintenance cycle. Process Drive stalled during drum imaging. Process Drive stalled during paper exit. 1. Check for supported media.
Causes:
Remedy: 1. Check for supported media. 2. Check that the Process Drive is correctly homed (ADJ 4.7.1). 3. Test the Process Drive using Service Diagnostics. 4. Replace the Process Driveif necessary. 5. Run the Transfix Fast and Slow tests. 6. Replace the Transfix Camshaftand load arms if necessary. 7. Run the Tilt Drive test, replace if necessary. 8. Replace the Process Drive.