Code: EC51 404C
Description: Serial ID mismatch error (support number : 6820) Memo : Remove the error in service mode when handling is completed.
Causes: Mismatch of the serial ID in the BACKUP PCB UNIT and the MAIN PCB UNIT at starting up the printer is detected.
Remedy: 1 This error occurs after MAIN PCB UNIT replacement Go to 2. This error occurs without performing MAIN PCB UNIT replacement (After replacement, perform PCB replacement mode and necessary adjustments.) Go to 3. 2 Start up the printer in service mode. Perform PCB replacement mode. (Automatic transformation from service mode to PCB replacement mode at starting up.) 3 Replace the MAIN PCB UNIT. (After replacement, perform PCB replacement mode and necessary adjustments.) The problem is resolved Complete. The problem is not resolved Put back the MAIN PCB UNIT, the one that has been installed before the replacement, and replace the BACKUP PCB UNIT.