Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 07 — Xerox WorkCentre 3119

Code: 07

Display: Open Heat Error, [Over Heat]
Description: There is a problem in the fuser unit. 1. Drive gear, PL 6 has melted. 2. Check the halogen lamp operation using Engine Test Mode, GP 4. 3.Check the thermistor, PL 5 for damage. 4. Check the following parts: • Thermostat, PL 5 • Fuser harness, PL 5 • Halogen lamp, PL 5
Remedy: 1. Check the drive assembly, PL 6. Install a new drive assembly if necessary. 2. Install new parts as necessary: • Halogen lamp, PL 5 • Fuser, PL 5 3. Install new parts as necessary: • Thermistor, PL 5 • Fuser, PL 5 4. Install new parts as necessary: • Fuser harness, PL 5 • Thermostat, PL 5 • Halogen lamp, PL 5 • Fuser, PL 5

← Xem tất cả mã lỗi Xerox WorkCentre 3119

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie