Code: 08
Display: [Paper Jam 0] Open/Close Door
Description: Paper has jammed in the feeding area of the paper input tray. 1. If continuous jams occur, check the following parts: • Pickup roller, PL 1 • Paper feed sensor, PL 1 • Feed roller, PL 4 • Feed roller 1, PL 4 Note: The Paper Feed Sensor is mounted onto the Main PBA, PL 1. 2. Check the RPR-friction pad and IPR plate, PL 9. 3. Check the pickup roller, PL 4 for contamination or damage. 4. Check the solenoid HB (Pickup), PL 3 by using ‘Pickup Test’ in Engine Test Mode, GP 4. 5. Check the following parts: • Cassette assembly, PL 9 • Paper guides, PL 4 • Spring-ETC TR, PL 4 6. If the paper feeds into the machine and Jam 0 occurs, perform ‘Feed Sen Test’ in Engine Test Mode, GP 4 to check the feed sensor. Note: The feed sensor is mounted on the SMPS/HVPS, PL 1. 7. Check the motor operation using Engine Test Mode, GP 4. Check the motor harness and connectors, PL 1 and stepper motor (drive), PL 6.
Remedy: Clear the jam 1. Ensure all rollers are clean and operate correctly, PL 4. 2. Clean with soft cloth dampened with IPA (Isopropyl Alcohol) or water. Install new parts as necessary: • RPR-friction pad, PL 9 • IPR plate, PL 9 3. Clean with soft cloth dampened with IPA (Isopropyl Alcohol) or water. Install a new pickup roller, PL 4 if necessary. 4. Install a new solenoid HB (Pickup), PL 3 if damaged. 5. Adjust or install new parts as necessary: • Guide paper, PL 4 • IPR-Plate, PL 9 • RPR-Friction Pad, PL 9 • Cassette assembly, PL 9 6. Install new parts as necessary: • Feed sensor actuator, PL 4 • SMPS/HVPS, PL 1 • Main PBA, PL 1 7. Install new parts as necessary. • Motor harness, PL 1 • Drive assembly, PL 6 • Main PBA, PL 1