Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 04-500 — Xerox WorkCentre 3215

Code: 04-500

Description: Main Drive (BLDC) Motor Start Fault The Main Drive (BLDC) Motor did not start within the specified time after the ready signal was sent.
Remedy: Enter Diagnostic Mode. Press the <Menu> button, the <#> button, then using the keypad select: [1934, Diagnostics, Machine Test, EDC Mode, DC330 Component Control, 100 Motor] to start the motor. The motor rotates. Y↓N→Remove the Right Cover and check the motor connector on the Main PWB. The connector on the Main PWB is connected correctly. Y↓N→Reconnect the motor connector. Remove the Duplex paper Guide. Check the motor connector. The connector is OK. Y↓N→Reconnect the connector The Imaging Unit Drive coupler may have overloaded. Remove the Print Cartridge and rotate the Imaging Unit coupler. The Imaging Unit coupler rotates freely. Y↓N→Replace the Imaging Unit. The Main Drive Motor or the Main PWB is defective. Perform the following: • Replace the Main Drive Motor PL 4.1. If problem persists, replace the Main PWB, PL 1.1.

← Xem tất cả mã lỗi Xerox WorkCentre 3215

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie