Code: 07-530
Description: Paper Feed Fault - Manual Feed Slot The lead edge was not detected by the Paper Feed Sensor.
Remedy: Check the position of the jammed sheet. The lead edge reached the Retard Roll. Y↓N→Enter Diagnostics Mode. Select: [Machine Test, EDC Mode, DC330 Component Control, 102-Sensor, Feed Sens] to block and clear the Feed Sensor. The sensor is OK. Y↓N→Replace the Feed Sensor (PL-XX). In Diagnostics Mode, select: [101-Clutch, Registration or PU?] to engage the drive to pick up paper from tray 1. The clutch engages. Y↓N→Replace the Tray 1 Pick up (Feed) Clutch (PL-XX). Perform SCP Final Actions. Check the Paper Feed actuator. The actuator moves freely is undamaged. Y↓N→Replace the Paper Feed actuator. Inspect the Paper Feed Sensor for damage. The sensor is OK. Y↓N→Replace the Paper Feed Sensor. Check the circuit of the Paper Feed Sensor.