Code: 20-100
Description: Fax Communication Error Fault A communication error occurred during a fax transmission.
Remedy: 1. Call the target fax number to confirm a fax response. 2. Check condition of the fax line and connection. 3. Verify that the fax line is an analog phone line. 4. Switch Off the power then switch On the power. 5. Verify that the country setting is correct. 6. Resend the fax job. 7. Check fax communications to a different machine.
Enter Diagnostic Mode. From the Control panel, select: [Report, Error Info, Print] to print the Error Information Report. The target fax is causing the error. Y↓N→Go to Diagnostics, select: [Report, Fax Options] to verify Fax Send settings are at default. Check that the Target Fax configuration is OK. The Target Fax is OK. Y↓N→Reconfigure Target Fax. Reseat the Fax PWB. The fault clears. Y↓N→Replace the Fax PWB. (PL-XX) Check the connection between the P/J on the Fax board (BSD XX) and the Main PWB. The connection is secure. Y↓N→Firmly reconnect the connector. Replace the Main PWB, (PL-XX).
Enter Diagnostic Mode. From the Control panel, select: [Report, Error Info, Print] to print the Error Information Report. The target fax is causing the error. Y↓N→Go to Diagnostics, select: [Report, Fax Options] to verify Fax Send settings are at default. Check that the Target Fax configuration is OK. The Target Fax is OK. Y↓N→Reconfigure Target Fax. Reseat the Fax PWB. The fault clears. Y↓N→Replace the Fax PWB. (PL-XX) Check the connection between the P/J on the Fax board (BSD XX) and the Main PWB. The connection is secure. Y↓N→Firmly reconnect the connector. Replace the Main PWB, (PL-XX).