Causes: The machine has detected that the DADF door assembly is open during run.
Remedy: 1. Open the DADF door assembly . Remove all jammed paper. 2. Remove all jammed paper from the DADF exit tray. 3. Open the DADF door assembly . Check that the door open sensor actuator is not damaged. 4. Enter dC330 code 05-160. Check the DADF door open sensor (Q05-160) . 5. Check the wiring between the DADF door open sensor and CN5 on the DADF PWB. If necessary, install a new DADF door open sensor . 6. If necessary, install new components: • DADF PWB . • Document transport assembly .